Xcel-Arc Razor Cut45, Operating Manual

8

RAZOR CUT45 PLASMA

45 Amp Inverter Plasma Cutter

Cuts: Steels, Stainless, Cast Iron, Brass, Copper. Aluminium

Optional machine accessories available - refer 

www.xcelarc.nz

 XA-CUT45RZ 

Standard Package 

Product Code: 

XA-CUT45RZ-K

Standard Package includes: RAZOR CUT45 Machine, SC80 Plasma Torch 6m, Earth Lead & Spares Kit

Overview

The RAZOR CUT45 is a high quality industrial-rated 230V single phase inverter Plasma Cutting machine produced using the latest in 

IGBT inverter technology. Designed for maximum cutting capacity and performance from single-phase power, this machine is reliable, 

robust and stacked with features. The RAZOR CUT45 produces a high temperature plasma stream providing effortless cutting of all elec

-

trically conductive materials including steel, cast Iron, stainless steel, copper, aluminium, brass, etc. The machine is supplied with a high 

quality Suregrip SC80 6mtr Plasma Torch with Euro Style connection, developed specifically to enhance and improve the cut quality of the 

RAZOR CUT45 machine. The SC80 Plasma Torch provides effortless starting of the cut with powerful, fast and accurate stand-off cutting 

with drag cutting capability. The SC80 Plasma Torch uses low-cost wear consumables with the additional benefit of longer life cycle of both 

Electrodes and Cutting Tips. The RAZOR CUT45 is an exceptional machine that is well suited to a wide range of applications including 

light industrial and general engineering, forestry and agriculture, sheet metal fabrication, site work, transport and marine repair, general 

demolition and maintenance work. The RAZOR CUT45 provides great portability, with plenty of cutting power to get the job done with 

outstanding speed and a great finish.  Built to our specification and manufactured in compliance to AS/NZ60974-1

Features

■

  Proven IGBT inverter technology

■

  Light Industrial application

■

  Outstanding performance from single-phase

■

  Pilot Arc Ignition (non-contact)

■

  Stand-off cutting with drag cut capability

■

  Maximum sever cutting thickness (steel) 20mm

■

  High quality Surecut SC80 Plasma Torch 6mtr

■

  Euro Style torch connection, low-cost consumables

■

  Integral pre-set air regulator, self-drain type

■

  Suitable to cut all electrically conductive materials

■

  Lightweight & compact design

■

  Strong metal housing with plastic front & rear panels

■

  Generator compatible (recommend 6KVA minimum)

■

  Tolerant to variable power supply

45Amp 230V Inverter Plasma Cutter  

16mm Cut on Mild Steel, Lightweight & Portable

Industrial Rated with Power Factor Correction

RAZOR CUT45

RAZOR CUT45

Technical Data

Power Supply / Phases (V-Ph) 

230V - 1 +/- 10%

Rated  Input Power  

5.50 

kVA

I

i

eff  

as per AS/NZ60974-1

15.0 Amps 

I

 Max   

29.2 Amps

Plasma Cut Current Range 

20-45 Amps

Duty Cycle @ 40°C 

as per AS/NZ60974-1

25% @ 45Amps

Duty Cycle @ 25°C

 (approximate)

55% @ 45Amps

No Load Voltage  

98V

Plasma Arc Start 

Pilot Arc 

Air Flow Draw Off 

6.7 cfm

Air Pressure 

75 psi

Steel Cut Thickness  

16mm 

Steel Sever Thickness 

20mm

Aluminium Cut Thickness 

8mm 

Aluminium Sever Thickness  

10mm

Stainless Cut Thickness 

8mm 

Stainless Sever Thickness  

10mm

Insulation Class 

F

Protection Class 

IP21S

Dimensions 

(LxWxH)

 410x165x330mm

Weight Power Source 

9.8kg

Certification Approval 

AS/NZ60974-1