Xcel-Arc RazorWeld RWX5OOO, Operating Manual

11

Figure 9

Figure 10

Figure 8 (Not for charging state indicating)

WARNING!

Leave the contaminated area immediately if:

A) 

Any part of the system becomes damaged.

B) 

Airflow into the helmet decreases or stops.

C) 

Breathing becomes difficult.

D) 

Dizziness or other distress occurs.

E) 

You taste or smell contaminants or an irritation occurs.

F) 

At very high work rates, the pressure in this PAPR device may become negative at peak  

inhalation flow.

5.3 Fitting

• 

Adjust the waist belt and dual shoulder strap size, so that the P1004 unit sits easily and is  

accessible and comfortable on your hips.

• 

Pull down the faceseal ring and put on the head top. Adjust the headgear to suitable tightness 

so that it will be stable on the head. The tightness of headgear can be adjusted by pushing  

and turning of the adjusting knob. See FIGURE 11 for details.

• 

Put on the helmet and adjust the headgear to suitable tightness so that it will be stable on the 

 head.

• 

The face seal should rest against your face, with a comfortable pressure on your temples.

• 

If the face seal doesn’t make contact with your face, you will not get sufficient sealing needed 

to offer the correct protection factor.

•

Check that the facial unit is stable on the head and has no moving parts. 

Turn on the system and check there’s no abnormal noise and no air leakage.

Figure 11