XCell Fury Extreme Assembly Manual
Page 16 of 138
Copyright Miniature Aircraft USA
Created: 11/14/2006
This document may not be distributed without permission of Miniature Aircraft USA
8:45 Ratio
Building Notes – Locate Bag 1A. If you purchased the 8.45 kit it will contain parts specific to the 8.45 gear ratio. Verify that they are
correct.
The gear ratio plates will be etched with the actual gear ratio and marked as left and right. Make sure that the marked ratio matches on
both plates and that there is a left and right plate.
The motor mounts will have square holes machined in the wide part of the engine mount. If they are round, then the mounts are for the
8.18 kit. In addition, there will be two shims that go between the motor and the mounts.
The main gear in the 8.45 kit will contain 93 teeth.
Set these parts aside to be used in future steps.
#119-50
Left Motor Mount –
8:45
1 each
#119-51
Right Motor Mount –
8:45
1 each
#0865-93
93 tooth main gear
1 each
#119-120
Graphite Ratio
Plates – 8:45
2 each
