4
Removing Your Disk Drive
To prevent data loss, do not unplug the EHD-3.5, turn it off,
or remove your disk drive from the enclosure until all steps
have been completed.
!
Windows
1.
Close any programs that might be using the drive.
2.
Right-click on the mobile hardware icon in the right-hand corner of the task bar.
3.
Select the hard-drive enclosure from the list of devices to safely remove it.
4.
After the computer indicates that it is safe to remove the device, slide the Power switch
to its OFF position to turn off the EHD-3.5.
5.
Use the included hex key to unlock the HDD door. Open the door and remove the disk
drive from the enclosure.
Mac
1.
Click on the eject symbol next to the device’s icon in the Finder.
2.
After the device disappears from the Finder, use the included hex key to unlock the
HDD door. Open the door and remove the disk drive from the enclosure.
Formatting Your Disk Drive
If your disk drive has not been formatted, or if your computer cannot read or recognize it, then
you may need to format the drive. Keep in mind that formatting a drive will erase all of its data.
If you have data on your drive, make sure to back it up before formatting.
The Windows XP and Vista 32-bit operating systems each have a maximum
dirve capacity of 2 TB.
Summary of Contents for EHD-3.5
Page 9: ...8 9 12 10 11...
Page 15: ...14 2 3 4 5...
