FAN OPERATION MODES
23
DE-HUMIDIFY AND HUMIDITY SETPOINT
22
>
>
DE-HUMIDIFY SETPOINT
: Allows you to reduce and maintain the relative humidity at
a specific setpoint.
>>
Please note that this feature functions in the COOL Mode only. Your TrueTouch™
Thermostat must be configured to control a cooling unit such as an air conditioner
of heat pump. Once you choose De-Humidify follow these easy steps:
• The
DH SETPOINT
with
-
and
+
icons allow you to lower and raise your setpoint
*
Example of typical use of the De-Humidify function: In order to de-humidify you must
set the de-humidify setpoint below the current relative humidity. Your TrueTouch™
will both lower and regulate temperature to the cooling setpoint while monitoring and
lowering the room humidity.
Since the De-Humidify feature uses the COOL Function of your Air Conditioner or Heat
Pump, your TrueTouch™ thermostat will turn off the air conditioning if either the dehu-
midifier setpoint or temperature setpoint is reached - which ever comes first.
>>
TrueTouch™ thermostat can operate the fan in one of the following three modes:
FAN AUTO
: The fan runs only when there is a demand for heating
or cooling.
FAN ON
: The fan runs continuously
FAN INTERMITTENT
: The fan runs 10 minutes per 1/2 hour
providing a convenient way to improve air quality and save energy.
When the fan is running, the animated fan icon will
appear on the HOME SCREEN.