R
FLASH
STROBE
FADE
SMOOTH
ON
OFF
R
G
B
W
Page 4 of 4
17
Product Name:
+44(0)1952 292441
technical@tamlite.co.uk
Document No:
V1
Tamlite Technical
Stafford Park 12,
Telford, Shropshire,
TF3 3BJ
INSTALLATION & OPERATING INSTRUCTIONS
220-240V
50/60Hz
ta
-25°C to 40°
Turn ON/OFF:
Press the ‘ON’ button to turn the light on, or press the ‘OFF’
button to turn the light off.
RGB (red/green/blue) colour selection:
The desired colour can be selected by pressing the
corresponding printed button i.e. Blue button for Blue light.
Brightness control:
To change the brightness of the light press the button to
increase or the button to decrease the intensity.
Dynamic mode:
The dynamic option can be switched on by pressing the ‘FLASH’,
‘STROBE’, ‘SMOOTH’ or ‘FADE’ button. The colours will
automatically change in a programmed tempo. To switch off the
dynamic mode press any colour button.
IP67
+
-
13
14
16
15
Remove the plastic tab from the handset to enable operation.
Replace the terminal covers.
Fix the driver in an appropriate position.
Connect the LED wires to the LED terminals on the power supply.
Connect the mains supply cable to the mains terminals on the driver.
