XciteRC 52000015, Manual

13

Charger 52000015

EN

Overview 

·

 Specifications 

·

 Operation

Overview

1

2

3

4

Specifications

Input voltage

100 - 240 V AC 50 Hz (mains adapter)
12V DC (via low-voltage socket), min. 3 A 

Power consumption

max. 36 W 

Type of battery

NiCd - NiMH: AA, AAA, A, SC, C
Li-Ion: LIR26650, 22650, 26500, 18650, 17670, 18490, 17500, 
17335, 16340 (123A), 14500, 10440

Battery compartments 

4

Charging current

300, 500, 700, 1000 mA (set separately per battery compartment)

NiCd, NiMH charging method

∆

 Peak

Discharge current

150, 250, 350, 500 mA (set separately per battery compartment)

Modes

Charging, test (set separately per battery compartment)

USB port

5 V max. 1 A

Using the charger for the first time

 WARNING: 

use only the included mains adapter

-

fire or explosion hazard! 

Connect the included 

mains adapter to the charger, then connect the mains adapter to an electrical outlet with 100-240 V AC. All 
LCD segments shows 

null

. The charger is now ready for operation.

USB port

5 V / 1000 mA

Mains adapter

port

1, 2, 3, 4:

   Select the battery compartment and set the charging 

parameters by pressing the buttons 

MODE

 or 

CUR-

RENT

MODE:

Select mode charge or test or test (charge and di-
scharge). Press and hold the button for min. 1 se-
cond down to activate the mode. To change the 
mode on a single battery compartment, press pre-
viously key 1 ... 4. 

DISPLAY:

  one keypress shows rotating the charging current, 

charging time, voltage, capacity and internal resis-
tance

CURRENT:

  Sets the charging current. The button works only 

during the first eight seconds after inserting the bat-
teries. By pressing (repeatedly) the charging current 
is increased gradually between 300 mA and 1 A. To 
change the charge current on a single battery com-
partment, press previously key 1 ... 4.