background image

18

15000000 XciteRC Hotbee 3D Quadrocopter

1

6

2

3

4

5

EN

 Getting started

Attention before flight

•  Ensure the battery packs of both transmitter and receiver and fully charged (saturated).
•  Ensure both the throttle stick and the throttle trim of your transmitter stay at the lowest positions before 

operation.

•  Please strictly obey the order of turn on and turn off before operation. When starting your flight, please 

turn on your transmitter first, and connect the power cable of your Hotbee 3D Quadrocopter last. When 
finishing your flight,please disconnect the power cable of your Hotbee 3D Quadrocopter first and tum off 
your transmitter last.

•  An upset in the order of connection may cause your Hotbee 3D Quadrocopter to loose control. Please 

cultivate a correct habit of turn on and turn off.

Definition of Orientation 

We define the orientation fo Hotbee 3D Quadrocopter in order not to cause confusion in the following de-
scriptions. That is to say, the tail boom of Hotbee 3D Quadrocopter is facing the pilot (tail in),and its head 
facing forward (front of pilot). The left hand of pilot Is the left side of Hotbee 3D Quadrocopter, the right hand 
of pilot Is the right side of Hotbee 3D Quadrocopter. Its head is to the front and its tail boom is to the back. 
The direction in which main body of Hotbee 3D Quadrocopter is facing up,and its skids are facing down.
    

Up

   Right

 Front 

 

 

 

Back

 

   

Down Left

Receiver features 

•  lt adopts 2.4G spraad spectrum technology.
•  Integrated design of 3-Axis gyro and 3- Axis accelerator

15000000-Hotbee-3D-Quadrocopter-Anleitung.indd   18

25.09.2013   13:45:18

Summary of Contents for Hotbee 120 3D









































Reviews: