09
©
2015 Hubsan
哈博森科技 版权所有
00:23:59
Altitute
GPS 6 N22.7914931 E:114.0479740
GPS 6 N:22.7914650 E:114.0479983
7.3V
7.3V
00:00:00
S: 0.1m/s
H: 0.0m
D: 0.0m
R 0
P 0
H 247
The Home Point is recorded when armed the motors with no less than 6 GPS satellites.
!
The RTH MODE only works when the GPS mode is activated with no less than 6 satellites.
7.2 RTH MODE (RETURN TO HOME)
ENTER INTO RTH MODE
Push the GPS Switch and the RTH Switch up, and the quad copter will enter into RTH mode.
The flight control system will control the quad copter to fly back to the home point and land
automatically.
7.1 GPS POSITIONING/ HOME POINT SETTING
1.) GPS Positioning works ONLY when the GPS signal has no less than 6 satellites.
2.) Home Point is recorded when armed the motors with no less than 6 GPS satellites.
3.) You should be in an open place to search for the GPS satellites, it’ll take 3 mins to finish the
searching, and the GPS signal strength depends on the flying environment.
Push up the GPS switch to activate the GPS positioning.
Pull down the GPS switch to exit the GPS positioning (only altitude hold will be active).
7. ADVANCED PERFORMANCE SETUP
GPS 6
GPS 6
00:23:59
Altitude
N22.7914931 E:114.0479740
N:22.7914650 E:114.0479983
7.3V
0.3m/s
1.5m
0m
R 0
P 0
H 247
Summary of Contents for HUBSAN X4 FPV BRUSHLESS
Page 19: ...19 X4 FPV Brushless DE...
Page 42: ...22 2015 Hubsan...
