background image

21

Nitro Tiger 21

Troubleshooting

Problem

Possible Error

To do

Engine is not starting no Fuel

put fuel in

plug is not glowing

check, if needed change

wrong Fuel

use the recommended Fuel

engine too hot

let engine cool down

engine drowned

pull one time without glow plug

air-filter blocked

Clean, oil

exhaust blocked

Clean

Glow Ignitor Empty

Charge, Change

Engine can not spin  Engine Drowned     

Read chapter “glow plugs”

Engine don´t Spin

Engine stops 
immediately

Idle speed is too low     

Read chapter “carburetor settings”

Glow Plug dirty / Weak     

Read chapter “glow plugs”

Air bubbles in the fuel tube

Check the Tube for holes

Engine to hot

Read chapter “carburetor settings”

Tank pressure is too low / Tube 
blocking    

Cleaning the Fuel Tube

Low Engine Power

mixture too rich     

Read chapter “carburetor settings”

Engine to hot

Let engine cool down 

Glow Plug leak     

Change Glow Plug

Dirty carburetor

Clean

Clutch grind

Clean/ Setting / Repair

Shaft poorly stored

looking for faults

Engine worn

Replace worn parts

Engine is hot

mixture too lean     

Read chapter “carburetor settings”

Wrong or Broken Fuel

Try  the Right / or a New one

Ventilation blocked

clean

Engine swallowed 
itself

Engine is to hot

Read chapter “carburetor settings”

mixture too lean

Read chapter “carburetor settings”

mixture too rich 

Read chapter “carburetor settings”

Glow Plug dirty / Weak

Read chapter “glow plugs”

Air bubbles in the fuel tube

Check the Tube for holes

Engine stops during 
acceleration from 
idle.

mixture too lean

Read chapter “carburetor settings”

mixture too rich     

Read chapter “carburetor settings”

Glow Plug dirty / Weak

Read chapter “carburetor settings”

Idle speed is too low

resetting

Engine stutter when 
cornering

Fuel is empty

Refueling

Idle speed is too low

resetting

EN

Troubleshooting

Summary of Contents for Nitro Tiger 21

























Reviews: