Note: the Official WIRED Xbox one controller must be required for using on
MaxRace F-1 v.4. The working step is as below:
First, connect the MaxRace F-1 v.4 to the Xbox one console and then plug in the
WIRED Xbox one controller (connect with charge cable). Wait until the Guide key
lights up. Connection is successful.
Second, unplug the WIRED Xbox one controller and plug in the PS3/Xbox 360
controller or the Logitech G25/G27/GT/MOMO to play your game.
How to use the Rapid fire function:
When connect the Xbox one
TM
/Xbox 360
TM
/PS 3
TM
wired controller to MaxRace F-1
converter 3.0 , you are able to get the Rapid fire function on these 3 controllers.
If you want to set the rapid fire function on the A button of Xbox one
TM
wired
controller, the setting step is as below:
Press the P button <8> once, when the digit tube shows the T
,press the
“
A
”
button on the Xbox one
TM
wired controller, the T light turn off, the setting is
completed, the “A” button got the rapid fire function.
If you want to remove the rapid fire function on the “A” button, simply repeat the
above steps.
