XE210C Hydraulic Excavator
Operating and Maintenance Manual
27
Operation
Inspection after starting the engine
When carrying out the inspection, move the machine to a wide area without any barrier to operate slowly.
No
one is allowed to approach the machine.
Check up if the action of the machine is the same as the display on the controlling mode instrument. If
not, change it into the right mode at once.
Check up the operation of the instrument and the device, and check up the operation of the bucket, the
bucket rod, the swing arm, the moving system and the steering system.
Check up if the voice, the vibration, the heating, the smell and the instrument of the machine works
normally, and check up if the engine oil or fuel oil is in leakage.
Repair the machine at once if there is any unusual thing.
Safety rules for changing the direction of the machine
Before moving, the upper structure should be
located at the proper position to make the chain
wheel located to the rear of the cab. If the chain
wheel is in front of the cab, the operating direction
is reversed (for example: going forward is changed
into going backward and the left into right). Before
moving, make sure again that there is no person or
barrier in the peripheral region.
Before moving, honk the horn to warn the person in
the area.
Only sit on the seat to operate the machine.
No one is allowed to sit on the machine besides the
operator.
Check up if the moving warner (if there is a warner)
works normally.
Ensure that the door or the window of the cab is
locked.
There is a blind area at the rear of the machine.
When the machine is turning a corner or turning
around, a signalman is needed. Especially pay
attention not to touch other machine or person.
Abide by the matters of attention above even if the
wing mirror is arranged on the machine.
chain wheel
