9 |
P a g e
SYSTEM MENU
SETTINGS
PARAMETER LIST
VOLTs DISPLAY
ON/OFF/ON WHEN LOW
VOLTs THRESHOLD
ADJ UP/DOWN
(see parameter description for details)
VOLTs CALIBRATE
ADJ UP/DOWN
(see parameter description for details)
OUTPUT MENUs to
HD/SDI
DOWN CONVERTER
OFF, 3G to HD, 2K to HD
(two separate optional software programs)
MENU TIMEOUT
OFF, 4, 6, 8, 10
RESTORE MEMORY
NO, TO FACTORY
SYSTEM VERSION
SHOW
OPERATION TIME
SHOW
EXIT MENU
Pushbutton Keypad Functions
Four backlit silicone rubber pushbuttons allow you to adjust all settings.
SELECT: SELECT
button is only active after the
MENU
button is pressed.
Button has two functions:
1) Unlocks the current programmed setting by
SELECT
ing it, so you can edit that setting.
2) Saves your user
SELECT
ed setting so you can continue editing another
PARAMETER
.
For example: You wish to edit the Frame Liners, LINE WIDTH
setting.
Press the
MENU
button until the
FRAMELINE MENU
page appears.
You will see a curser
>
indicating the last
PARAMETER
edited. Use the
UP/DOWN
buttons to move through the list to the
REACTION
setting,
the curser will follow.
Stop at the
LINE WIDTH
setting, press the
SELECT
button a second curser will appear
>
next to the current programmed setting. Again use the
UP/DOWN
buttons to scroll and
select your new setting,
1, 2, 3, 4
You now have three options to save this setting into memory:
1) Let the menu time out because you are done editing.
2) Press the
MENU
button to edit another page.
3) Press the
SELECT
button that saves the setting if you are continuing to edit another
PARAMETER
on that same
MENU
page.
UP:
UP
has two functions: Button is active only after
MENU
button is pressed.
1) Scrolls you through the list of available
PARAMETERS
on that
MENU
page. A curser
>
indicates the
MENU
item that is currently selected.
2) When editing a
SETTING
, a second curser
>
appears indicating that you are in edit
mode and the
UP
button scrolls through the available user programmable settings for that
PARAMETER
.
DOWN: DOWN
has two functions: Button is active only after
MENU
button is pressed.
1) Scrolls you through the list of available
PARAMETERS
on that
MENU
page. A curser
>
indicates the
MENU
item that is currently selected.
2) When editing a
SETTING
, a second curser
>
appears indicating that you are in edit
mode and the
DOWN
button scrolls through the available user programmable settings for
that
PARAMETER
.
