English
8
Preparing to Use
Before using the product, charge
the battery by connecting the AC
adapter supplied.
Inserting the Battery Pack
Slide the battery pack into the groove
until it clicks.
Ejecting the battery pack
Note: Press and hold the Battery Eject
button and push the battery pack to
the opposite direction to the way of
attaching.
Using the Attachable Leg for Your
PMP
You can easily keep your PMP stand-
ing alone using the attachable leg
hanging at the end of the hand strip.
Connecting the AC Adapter
Connect the AC adapter to the DC 5V
jack of the product. Firmly plug the AC
adapter into the power outlet.
Charging the Battery Pack
While charging the battery, the charge
status light turns red. When the bat-
tery is fully charged, the red light of
the charge disappears.
Before using the unit, charge the
battery for about 3 hours so that it is
completely charged.
Checking the Battery Level
The Battery Level Display shows the
amount of battery power remaining in
the Battery Pack.
Battery Level Indicator State
Fully charged
40-60% used
60-80% used
The device turns
off automatically
5 seconds later in
order to protect the
inner circuitry.
505IM.indd 8
M.indd 8
19.12.2006 14:12:16
19.12.2006 14:12:16
