background image

 

XDrum DD-460 

 

 

 
 

 

Safety precautions and precautionary measures  

 
 

 

Always place the appliance securely on a level surface to avoid 
injury from the appliance falling over. 

 

 

Do not place any devices that can heat up (e.g. lighting 
equipment or fog machines) on the unit. 

 

 

Never touch the mains cable or the unit when it is wet, as this 
may cause an electronic shock. 

 
Do not clean the plastic housing with solvents or other chemical-based cleaning 
agents.  
 
Keep the unit away from rain and moisture. 
 
Damage caused by non-compliance with this user manual is not covered by the 
warranty. The dealer accepts no liability for any resulting defects or problems.  
 
Before connecting, make sure that the mains cable is in perfect condition. 
 
Only touch the mains cable by the plug. 
 
Always plug in the mains plug last. Plugging in must be done without using force.  
 
Avoid contact of the mains cable with other cables.  
 
Do not bend or twist the cable and do not place any objects on it.  
 
This unit can damage your hearing if the volume is too high. 
If you experience hearing problems or ringing in your ears, consult a specialist 
immediately.  
 
Make sure that no objects or liquids of any kind get into the unit.  
 
Protect the unit from hard impacts. 
 
Disconnect the unit from the mains during thunderstorms.  
 
Switch off the unit immediately and unplug the mains adapter from the socket if: 

The power supply unit, the power cable or the plug is damaged 

Smoke or unusual odour occurs 

Objects have fallen into the unit or liquid has been spilled on the unit. 

The unit has been exposed to moisture 

The unit does not function properly or there is a significant change in 
performance 

 

 

Summary of Contents for DD-460P Mesh E-Drum Kit


















Reviews: