10
This function allows you to set the song's tempo by tapping
in tempo on a pad.
1.
Press the [ tempo/tap ] button. Display shows the current
tempo value.
2.
Tap on the pad in the tempo that you want to get.
Tap on the pad 4 times. The last two beats are only
detected and are set as your desired speed.
3.
The song will be played with your desired tempo you set.
When the song is playing, you are not allowed to change
the tempo with this tempo function.
* Any pads can do the tap tempo function.
* If there is no invalid operation, display will quit to the previous
menu after 2 seconds.
Tap tempo function
1.
Press [ drum off ] button. The drum off indicator lights.
The drum mute function is active.
2.
Press [ start/stop ] button to playback the song. The drum part
in the song will be muted.
3.
To cancel the drum mute function, press [ drum off ] button
again. The drum off indicator light goes off.
*
The drum mute function can be used during song playing.
1.
Press the [ click ] button to start the metronome. It will be
played with tempo.
2.
Press the [ click ] button again to stop the metronome.
Note: The click voice will not stop automatically once the song
finished until you press the [ click ] button.
The lighting guide function provides you a valuable lesson to
practice or learn the drum kit with playing the preset song.
1.
Select the song number you want to practice.
2.
Press [ drum off ] button.
3.
Press [ start/stop ] button to start song play.
4.
Strike the pad in accordance with the lighting of pad's
indicators or press the hi-hat pedal and kick the bass drum
pad exactly when their indicators light.
*
During song playing, you can change the Tempo(speed),
or use the tap tempo function to set your desired tempo.
Drum off indicator
Mute a Drum part
Play with a the Click voice
Use the lighting guide function
* Press the [ hi-hat control ] + [ kick ] buttons
to turn off all the pad's indicator. Press the
[ hi-hat control ] + [ kick ] buttons again to
turn on all the pad's indicator.
tempo/t ap
