Recording a Song
About Recording
In NORMAL mode, the digital drum allows you to quickly record
your performance as you play the pads. There are two ways to
start recording a new song:
Press the [START/STOP] button
Hit any pad
On Recording Standby, you can use the [ ] or [ ] button to
adjust the parameters(as shown to the right).
Recording Pad Performances
1.
Press the [RECORD] button, enter recording standby. The
[RECORD] LED will flash.
2.
Press the [START/STOP] button or strike the pad. Recording
will start. The RECORD LED will turn on. After Count-in, the
display will show:
Now you will record your performance.
3.
Press the [START/STOP] button again, or press the
[RECORD] button. Stop recording, the [RECORD] LED will
turn off.
Recording Performances Accompanied with a Song
If you want to record your performance accompanied with a
song, first set the parameters (Song Number and Drum off)
before start to record. The display will be as shown to the right:
For details on setting, refer to Recording Standby. Recording
operations are as mentioned above.
Playing Back Your Recorded Performance
Press the [PLAY] button. Play back your recording. The display
will show:
Press the [PLAY] button again. Stop playing back your
performance.
Recording Standby
Use the [PAGE] button to scroll through the various record
parameters and the [ ] or [ ] button to adjust the value.
Page1:
Setting the song accompanied or not
Page2:
Selecting the drum kit that you want to record.
Page3:
Setting the recording tempo
Page4:
Setting the time signature
Page5:
Setting the interval
Page6:
Setting the drums in songs muted or not
Page7:
Setting a measure count-in inserted or not before
recording.
1-45
21
0
5
25
75
95
100
aw_DD516_Manual_G06_101108
2010 11 8 14:28:27
