Pedal
Pedal Vel. 60
- Rim Velocity:
Rim velocity correction option will appear
when you strike on the rim or edge parts. The higher the
value is, the louder it will become. Cymbal edges are also
included in this setting.
- Pedal Vel.:
Decides the velocity triggered by hi-hat pedal.
The higher the value is, the louder Pedal Chick and Pedal
Splash sounds you get.
- Calib:
Calibration for the pedal range. Select this option,
press down to the floor and then release the pedal slowly.
Repeat the procedure several times to get more precise
range and finish the calibration.
-
Spilt Point:
Sets the velocity split point of certain drum
pads. If you play the softer than this value, it will trigger
one sound. Above that value it will be trigger another
sound.
-
Chick Time:
Defines the trigger disabling time after you
press down the pedal. It can be used to avoid unwanted
triggering after physical contact.
-
Splash Time:
Defines the level of difficulty to trigger
Pedal Splash(Foot Splash)
Note
：
Some unique settings, such and Rim
Velocity, Spilt Point.,Pedal Vel., Calib and etc., they will ap-
pear only if the matching part is struck. Or you can find them
using DRUM button.
Tip
：
Use DRUM button can switch between trig-
gers quickly in SETUP menu.
RESET:
Restore to factory settings. It is strongly recom-
mended to reboot the sound module after reset in completed,
in order to avoid some unexpected behavior.
Kits:
Initialize all the kits, including user kits.
Settings:
Initialize all system settings.
Xtalk:
Initialize cross talk to default value.
Songs:
Initialize all user patterns..
All:
Initialize everything to factory settings.
TOM1-Rim ADV
Rim Velocity 50
Pedal
Calib 751-3900
SETUP
RESET Kits
SETUP
1
7
SNARE-X-StickADV
Split Point 50
