1. Power Button
Long press to turn power On / Off, short press to turn the screen On / Off .
2. TF Card Slot
TF card slot, maximum support 256GB TF card.
3. Back Key
Enter the menu, press the Back key to return to the previous menu; in the music
player interface or other user interface, long press the back button for 2 seconds
to return to the main menu interface.
4. Option Key
Short press to pop up / close the current interface’s shortcut menu, but short
press in the main interface is to enter the Playback Settings.
5. Play / Pause / Confirm Button
Short press Play / Pause in playback interface, short press to confirm in setting
interface, adjust setting value or save for use.
6. Previous / Up (Switch Button)
In the playback interface, short press cut to previous song, long press fast
forward; non-playing interface for flipping up to select menu items.
7. Next / Down (witch Button)
In the playback interface, short press cut to next song, long press fast forward;
non-playing interface for flipping down to select menu items.
8. USB Port, with a variety of features
◆
Connect with the computer, you can copy, delete and manage the song files;
◆
Support external USB flash drive, removable hard disk, etc., play songs from
external storage device;
◆
Set the USB mode to DAC mode, X10T II can be used as the USB digital
turnable, maximum support DSD64, PCM192KHz/24Bit (driver required)
◆
USB audio output, X10T II can output USB audio, through the TYPE-C OTG
cable to the decoder, maximum output DSD256 (DOP), PCM384KHz/32Bit;
9. Support AES
10. Optical/Coaxial output
USB cable that came with this unit, charge the unit. The player will boot and
display Charging symbol.
★
Note
：
1. The player can be charged both power on/off, when you charge it while it’s
on, if the player not playing music, the system will shut down according to the
Power-saving Time Setting, and into the charging page.
2. When using the computer to charge, please keep the computer running, if the
computer goes to sleep state, it will not charge the player. Normal state of full
charge time is 5 hours.
3. When using the adapter (charger) to charge, it is required that the adapter’s
voltage is 5V output, the current should be bigger or equal to 2A, full charge time
is less than 3 hours.
4. To prevent battery degradation, please charge at least once every six months.
5. Battery life is more than 15 hours.
Charging
1. Connect this unit to a running computer or a compatible adapter using the
3
