36
Evolve User Manual V1.0 by XDynamics Limited
Attaching and Detaching the Propellers
The Evolve drone employs a sturdily constructed attach and detach propeller system. With a quick half
turn installation the drone can be ready to fly within minutes of pulling it out of the pack. To detach the
propellers follow the step below in reverse.
Step 1 - Ensure that the CW / CCW direction of the
propeller is aligned with the direction of the motor.
Step 2 - Place the propeller on top of the motor and
apply a downwards twisting force that matches the
direction of the arrow shown on top of the propeller.
Step 3 - Keep twisting the propeller with downwards
force until the red dot on the propeller and the do
on the motor are aligned. Once you release the
downward force the propeller should pop up and lock
securely into place. Confirm this is secure by twisting
the propeller left and right and checking that the
propeller is securely fixed to the motor.
See diagram for attaching and detaching the propellers:
Step 1
Step 2
Step 3
