- 3 -
■Product characteristics
1. Manual projection work is no longer required.
2. Brush performance is stabilized.
■
Product structure
（XP-AUT06M）
1) XEBEC Self-Adjusting Sleeve™ main body
2) Rack gear stand set
（XP-AUT15M）
1) XEBEC Self-Adjusting Sleeve™ main body
2) Rack gear stand set
*1: Brush mounting screws are included in the package as separate parts.
[Operation image]
Hole for centering
35
Shank
Shank head
1) XEBEC Self-Adjusting Sleeve™
main body
Brush mounting screws
(M2.6 × 2 pcs.)
*1
Guide sleeve
Brush holder
Cover plate
Guide sleeve fixing bolts (M4 × 4 pcs.)
Side gear
1) XEBEC Self-Adjusting Sleeve™
main body
Brush mounting screws
(M3 × 2 pcs.)
*1
Guide sleeve
Brush holder
Cover plate
Guide sleeve fixing bolts (M4 × 4 pcs.)
Shank head
Side gear
2) Rack gear stand set
Low-head M10 screw
Washer
Spring washer
Rack gear
Hexagonal brace
Base washer
Hole for centering
Hole for rack gear installation (3 holes)
The brush projection work by the operator is unnecessary until one brush is fully used by
operating the brush projection work within the machine through the use of a rack & pinion
mechanism. (Adjustment amount can be set every 0.05mm from 0.05mm to 1.0mm.)
Quality is stabilized by maintaining optimum projection.
As shown in the figure
above, the main body
passes through the rack.
The main body side gear and
rack gear are meshed.
The projection amount of
the brush is adjusted.
XEBEC Self-Adjusting Sleeve ™（XP-AUT06M/XP-AUT15M）User Manual
