6
BASIC OPERATION
(1) (3),(4),(5),(6),(7),(8) (14) (11) (12)
k
(13) (10)
( 9 )
(1) POWER ON- OFF BUTTON (PWR)
Press this button to turn the unit on or off. When the ignition switch is "on", the unit will turn on
automatically if the CDC/BAND/AUX buttons are pressed.
(2)
AUDIO (LEVEL) CONTROL (/-)
To increase the volume level, turn the /- knob clock-wise (+ direction). VOL will appear and the
volume level will be shown on the display panel from a minimum of V--0 to a maximum of V--46. To
decrease the volume level, turn the knob counter-clockwise (-direction). The display will automatically
return to the normal indication 5 seconds after the last volume adjustment or when another function is
activated. This control is also used in conjunction with the Select (SEL) control button(3) to adjust the bass,
treble, balance and fader levels as described (4), (5), (6) and (7)
¨ é
SELECT (SEL) CONTROL BUTTON
This button is used to select the audio function (volume, bass, treble, balance, or fade) whose setting is
adjusted using the /- control
¨ è
. Pressing the SEL button once will set the unit for volume (VOL)
adjustment as described previously. Pressing the button additional times will select bass adjustment (BAS
will appear on the display panel) treble adjustment (TRE on the display), balance (BAL), or fader (FAD).
The display will automatically return to the normal indication 5 seconds after the last adjustment or when
another function is activated.
¨ ê
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing the SEL button
¨ é
so the BAS indication
appears on the display panel. With 5 Seconds of choosing the Bass mode, turn the /- control
¨ è
