background image

 

7

counter-clockwise to decrease the bass response or clockwise to increase it as desired. The level will be 
shown on the display panel from a minimum B-6 to maximum of B +6. (B 0 indicates flat response) The 
display will automatically return to the normal indication 5 seconds after the last adjustment or when another 
function is activated. 

 
¨ ë

 TREBLE CONTROL 

To adjust the treble level, first select the Treble mode by pressing the SEL button

¨ é 

so the TRE indication 

appears on the display panel. Within 5 seconds of choosing the Treble mode, turn the /-control 

¨ è

 

counter-clockwise to decrease the treble response or clockwise to increase to as desired. The level will be 

shown on the display panel from a minimum T--6 to a maximum of T+6 (T 0 indicates flat response). The 
display will automatically return to the normal indication 5 seconds after the last adjustment or when another 
function is activated. 

 
¨ ì

 LEFT/RIGHT BALANCE CONTROL 

To adjust the left-right speaker balance, first select the Balance mode by pressing the Select button

¨ é

 so the 

BAL indication appears on the display panel. Within 5 seconds of choosing the Balance mode, turn the 

VOLUME control

¨ è

 counter-clockwise to adjust the stereo balance to the left channel speakers or clockwise 

to adjust it to the right channel speakers. The balance position will be shown on the display panel from L 12 
(full left) to R 12 (full right). When the volume level between the left and right speaks is equal, C 00 will be 
shown on the display panel. The display will automatically return to the normal indication 5 seconds after the 
last adjustment or when another function is activated. 

 

¨ í

 FRONT REAR FADER CONTROL 

To adjust the front-rear speaker balance, first select the Fader mode by pressing the Select button

¨ é

 so the 

FAD indication appears on the display panel. Within 5 seconds of choosing the Fader mode, turn the 

VOLUME control

¨ è

 counter-clockwise to adjust the front-rear speaker balance to the rear speakers or 

clockwise to adjust it to the front speakers. The fader position will be shown on the display panel front R 12 
(full rear) to FAD F12 (full front). When the level between the front and rear speakers is equal, C 00 will be 
shown on the display panel. The display will automatically return to the normal indication 5 seconds after the 
last adjustment or when another function is activated. 

 

¨ î

 LOUDNESS CONTROL (LOUD) 

When listening to music at low volume levels, this feature will boost the bass and treble ranges to 
compensate for the characteristics of human hearing. Press the LOUD button for longer than 2 seconds to 
activate this feature and the indication LOUD will appear on the display panel. Pressing the button again for 
longer than 2 seconds will deactivate the feature (the LOUD indication will disappear from the display 
panel). 

 

¨ ï

 TIME/FREQUENCY SELECTOR (T/F) 

During radio operation, press this button to call the time display on the quartz clock. The display will return 
to the radio frequency indication after 5 seconds. During integral CD player operation, a press of the button 
will call the time display, but disc play will continue uninterrupted. If the time of day is not adjusted within 5 
seconds, the display will return to the play mode currently in effect.

 

          

 

Summary of Contents for SCD-7000

















Reviews: