Product Details:
• Item: 6-digit 1-inch Xenios USA® Nano Timer
• Dimension: 155mm X 47 mm X 22 mm
• 1-inch-tall crystal clear bright led display for maximum visibility.
• Material: silicon case with acrylic lens, easy-to set integrated buttons on the top.
• The Nano Timer is supplied by an internal Lithium Battery 800mAH - 3.7V
• Power adapter charger specs: AC 110V-240V – Output DC 5V 1A with Type C
USB cable.
Power adapter is not supplied with the Xenios USA® Nano
Timer.
• Warning: to recharge the Nano Timer battery with a wrong voltage may result into
product damages that will not be covered by the product warranty.
• Internal battery capacity: full charged in 3 hours, lasts 10 hours.
• Special Features: built-in powerful magnet on the timer back side to let the Timer
be mounted on metal surfaces.
General Settings:
There are
7 modes
on the software of the Xenios USA
®
Nano Timer.
1. Clock:
12-hour/24-hour HH:MM time display.
2. Countdown timer:
programmable, max countdown from 99:59. Format: dn MM:SS.
3. Count-up timer:
programmable, max count up to 99:59. Format: UP - MM:SS
4.
Workout Interval timer (3x):
programmable workout time, rest time and rounds,
up to 99 rounds. On the memory of the timer can be saved up to 3 different Interval
Training modes (under the same program mode called 01).
5.
TABATA timer:
pre-programmed interval timer, 8 rounds of 20 seconds workout and
10 seconds rest.
6.
FIGHT GONE BAD timer:
pre-programmed interval timer, 3 rounds of 5X1 minute
workout and then 1 minute rest.
7.
Stopwatch:
count up from zero up to 99 minutes 59 seconds and 99 hundredths of
a second. Format: MM: SS: MS.
At First
• Press the
FUNCTION
button to select the desired above listed mode.
To start the Most Recently Used Workout Program:
•
Press the
START
button to start, just after having pressed the
FUNCTION
button
to select the Interval Timer mode.
To Set a New Workout Program:
•
Hold the
SET
button for
3 seconds
to enter the setting mode. The first digit starts
blinking.
•
Set the target time by pressing the
+/-
button and then store it by pressing again
the
SET
button.
•
Each next pressing of the
SET
button will move on to the next digit setting. Press and
hold
+/-
button to quickly change the value of the digit.
•
Press and hold the
SET
button for
3 seconds
to exit and save the whole settings.
Timer stops blinking.
•
Press the
START
button to begin or stop the just set Workout Program.
•
To reset a timer: pause the timer and then double fast tap
START
button
Clock:
• Press the
FUNCTION
button to select the clock function. Or hold
START
button
for 3 seconds to turn on the display. Timer displays the clock function every time it is
powered on.
• To change the time, hold the
SET
button for
3 seconds
to enter the setting mode,
the first digit starts blinking.
•
POWER
button: press and hold
POWER
button for
3 seconds
to turn on/
off the timer.
•
+/-
button: press to increase/decrease the value. Hold the number button for
fast increase or decrease.
•
+/-
button: press to adjust brightness across 4 levels.
•
FUNCTION
button: select between 7 functions mode.
•
SET
button: press and hold for
3 seconds
into setting mode.
•
START
button: press to start/stop the timer.
• Reset:
stop the timer before resetting it. Double fast tap the
START
button
to reset.
• Battery status: small red light on the top. Led light turns on when timer is being
charging, and turns off when full charged. Timer displays “Lo” when battery is low.
• Press and hold
FUNCTION
to activate/deactivate the Nano Timer sound.
Standard time (12-hour)
Military time (24-hour)
Button Layout:
