background image

9. WeChat official account configuration (Usmart home Wi-Fi)

optional

1) Open the WeChat search "Usmart home " official account.

2) Click “WeChat Control” tap on Usmart home official account
3) Register and log in with your mobile number.
4) Click add Wi-Fi device

Set up network (lock setting)
5) After pressing “*”+“#” to verify the administrator, press “1” to enter the administrator settings,
and press “3” to configure the network.
6) Network configuration: press "1" for hotspot connection, press "2" for delete connection.
c) Hotspot connection mode: follow the hints of WeChat official account
7) When connection successful, the 1234 button light on the keyboard light up in sequence,
voice on “Operation succeeded”
8) When connection fails, the 1234 button will not light on, and the voice on “Operation failed”
after timeout.

10. Other notes

1

Input the wrong password more than 5 times in a row, the keyboard lock for 30 seconds, it

does not respond to any operating system in 30 seconds.

2

Password peeping prevention function: input password as follows when opening the door

with password: XXX password XXX; you can add some extraneous codes before and after
the password, and then press # to confirm. The password must be included in the input
contents.

3

If there is no operation more than 10 seconds , system will automatically exit.

4

After the voltage is lower than 4.8v, the lock will automatically alarm every time when it is

opened. After the alarm, the lock can be opened for 200 times. After the number of times
exceeds, each unlock delay is 5 seconds, new batteries must be replaced before the
number of times available.

5

When normal open mode is off, press 5 # successively, and the voice says "please enter

unlock information". After entering the unlock information, the voice says "normal open
mode, please pay attention to locking".

6

When normal open mode is on, press 5 # successively, and the voice says "normal open

mode closed".

7

Back locking function: After pressing back locking key, the voice says "the door is locked".

Now, ordinary users cannot open it, and only administrators can do so.

Summary of Contents for SM-SL608








Reviews: