Wireless
LED Headlight System (L2SW) www.xenosys.co.kr
25
① Store it under half-charged condition in case of non-use immediately.
② Recommend to keep it in the dry condition with ambient temperature range of +15℃ ~
+25℃. Keep away from too hot or extremely cold places.
CLEANING INSTRUCTION
1.
Clean up LED lens module surface by soft cloth with neutral detergent regularly to remove dirt,
and leave it dry for usage.
2.
Do not use volatile chemicals like benzene, alcohol, thinner, and acetone for cleaning. If
there is any contact of these chemicals to the surface, clean it by soft cloth dipped with
neutral detergent. However, the manufacturer is not responsible for any defect caused by
these chemicals.
3.
Do not expose the equipment to the sterilizing or cleaning process with excessive
temperature and humidity. In case of the exposure, it will cause the damage to the equipment
and out of warranty. Especially, inside parts of the main body do not allow the contact of any
liquid.
SERVICE & WARRANTY
1. This service & warranty statement applies to all countries to the extent that there is no special
warranty rule.
2. All services & warranty should be provided by Xenosys Co., Ltd. or authorized personnel from
Xenosys Co., Ltd.
3. Warranty becomes effective from the sales date for material, production defective, or defect
under the normal use. Thus the warranty period starts from the first purchaser’s sales date.
Warranty will not be applied for abuse, improper use, negligence, improper installation, and
operation or any remodeling, adjustment and modification by unauthorized personnel or
technician. Refer to the warranty period in line #12.
4. Exchanged or any broken part after repair become to the property of Xenosys Co., Ltd.
