background image

13

XENYX 1204/1204FX

6. WARRANTY

Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names

of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use

neither constitutes a claim of the trademarks by BEHRINGER

®

 nor affiliation of the trademark owners with BEHRINGER

®

. BEHRINGER

®

 accepts no

liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained

herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not

agents of BEHRINGER

®

 and have absolutely no authority to bind BEHRINGER

®

 by any express or implied undertaking or representation. No part of this

manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for

any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER

®

 is a registered trademark.

ALL RIGHTS RESERVED. © 2006 BEHRINGER Spezielle Studiotechnik GmbH,

Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany.

Tel. +49 2154 9206 0, Fax +49 2154 9206 4903

6. WARRANTY

§ 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW

1. This warranty does not exclude or limit the buyer’s statutory

rights  provided  by  national  law,  in  particular,  any  such  rights

against  the  seller  that  arise  from  a  legally  effective  purchase

contract.
2.  The  warranty  regulations  mentioned  herein  are  applicable

unless they constitute an infringement of national warranty law.

§ 2 ONLINE REGISTRATION

Please do remember to register your new BEHRINGER equipment

right  after  your  purchase  by  visiting  www.behringer.com

(alternatively www.behringer.de) and kindly read the terms and

conditions  of  our  warranty  carefully.
Registering  your  purchase  and  equipment  with  us  helps  us

process your repair claims quicker and more efficiently.
Thank you for your cooperation!

§ 3 WARRANTY

1. BEHRINGER (BEHRINGER International GmbH including all

BEHRINGER subsidiaries listed on the enclosed page, except

BEHRINGER  Japan)  warrants  the  mechanical  and  electronic

components of this product to be free of defects in material and

workmanship for a period of one (1) year* from the original date

of  purchase,  in  accordance  with  the  warranty  regulations

described  below.  If  the  product  shows  any  defects  within  the

specified  warranty  period  that  are  not  excluded  from  this

warranty  as  described  under  §  5,  BEHRINGER  shall,  at  its

discretion,  either  replace  or  repair  the  product  using  suitable

new or reconditioned parts. In the case that other parts are used

which  constitute  an  improvement,  BEHRINGER  may,  at  its

discretion, charge the customer for the additional cost of these

parts.
2. If the warranty claim proves to be justified, the product will be

returned to the user freight prepaid.
3. Warranty claims other than those indicated above are expressly

excluded.

§ 4 RETURN AUTHORIZATION NUMBER

1. To obtain warranty service, the buyer (or his authorized dealer)

must call BEHRINGER (see enclosed list) during normal business

hours 

BEFORE

  returning  the  product.  All  inquiries  must  be

accompanied by a description of the problem. BEHRINGER will

then issue a return authorization number.
2.  Subsequently,  the  product  must  be  returned  in  its  original

shipping carton, together with the return authorization number to

the address indicated by BEHRINGER.
3. Shipments without freight prepaid will not be accepted.

§ 5 WARRANTY REGULATIONS

1.  Warranty  services  will  be  furnished  only  if  the  product  is

accompanied  by  a  copy  of  the  original  retail  dealer’s  invoice.

Any product deemed eligible for repair or replacement under the

terms of this warranty will be repaired or replaced.

2.  If  the  product  needs  to  be  modified  or  adapted  in  order  to

comply with applicable technical or safety standards on a national

or local level, in any country which is not the country for which

the  product  was  originally  developed  and  manufactured,  this

modification/adaptation  shall  not  be  considered  a  defect  in

materials  or  workmanship.  The  warranty  does  not  cover  any

such  modification/adaptation,  irrespective  of  whether  it  was

carried  out  properly  or  not.  Under  the  terms  of  this  warranty,

BEHRINGER shall not be held responsible for any cost resulting

from such a modification/adaptation.
3. Free inspections and maintenance/repair work are expressly

excluded from this warranty, in particular, if caused by improper

handling of the product by the user. This also applies to defects

caused  by  normal  wear  and  tear,  in  particular,  of  faders,

crossfaders, potentiometers, keys/buttons, tubes, guitar strings,

illuminants and similar parts.
4. Damages/defects caused by the following conditions are not

covered  by  this  warranty:

s

improper handling, neglect or failure to operate the unit in
compliance with the instructions given in BEHRINGER
user or service manuals.

s

connection or operation of the unit in any way that does
not  comply  with  the  technical  or  safety  regulations
applicable in the country where the product is used.

s

damages/defects caused by force majeure or any other
condition that is beyond the control of BEHRINGER.

5. Any repair or opening of the unit carried out by unauthorized

personnel  (user  included)  will  void  the  warranty.
6. If an inspection of the product by BEHRINGER shows that the

defect in question is not covered by the warranty, the inspection

costs are payable by the customer.
7. Products which do not meet the terms of this warranty will be

repaired  exclusively  at  the  buyer’s  expense.  BEHRINGER  will

inform the buyer of any such circumstance. If the buyer fails to

submit  a  written  repair  order  within  6  weeks  after  notification,

BEHRINGER will return the unit C.O.D. with a separate invoice

for  freight  and  packing.  Such  costs  will  also  be  invoiced

separately when the buyer has sent in a written repair order.

§ 6 WARRANTY TRANSFERABILITY

This  warranty  is  extended  exclusively  to  the  original  buyer

(customer  of  retail  dealer)  and  is  not  transferable  to  anyone

who may subsequently purchase this product. No other person

(retail dealer, etc.) shall be entitled to give any warranty promise

on behalf of BEHRINGER.

§ 7 CLAIM FOR DAMAGES

Failure of BEHRINGER to provide proper warranty service shall

not  entitle  the  buyer  to  claim  (consequential)  damages.  In  no

event shall the liability of BEHRINGER exceed the invoiced value

of  the  product.

* Customers in the European Union please contact BEHRINGER

Germany Support for further details.

Summary of Contents for 1204














Reviews: