background image

All right reserved 2010 

Future Power (HK) Limited       

   

Page 6 / 7 

C.    Charging the headset 

This device has an internal, rechargeable battery which must be fully charged before used for the first time. It takes 

you about 3 hours to charge the battery full for the first time. During charging, the battery indicator shows charging 

signal. When the battery is fully charged, the Battery indicator shows Full. For the later on charging, it takes about 90 

minutes.   

You can charge XBS-08 Bluetooth headset either by using the USB charging cable, AC travel charger (Optional) or 

the car charger (Optional). 

 

USB charging cable 

Plug the charger lead of USB charging cable into the charging port of XBS-08 Bluetooth headset. And then plug the 

other  end  of  the  USB  charging  cable  into  the  computer’s  USB  port. When  charging  is  complete,  remove  the  USB 

charging cable and remove the charger lead from your headset (Please refer to Fig.1, Fig.2.) 

 

Car charger   

Plug the car charger into the cigarette lighter socket. And then plug the charger lead into the charging port of XBS-08 

Bluetooth  headset.  When  charging  is  complete,  remove  the  car  charger  and  remove  the  charger  lead  from  your 

headset (Please refer to Fig.3.) 

 

Travel charger 

Plug the travel charger into 110-240V wall socket. And then plug the charge lead into the charging port on XBS-08 

Bluetooth headset for charging. When charging is complete, remove the travel charger and remove the charger lead 

from your headset (Please refer to Fig.4.) 

 

The fully charged battery has power for up to *6 hours of talking time or up to *100 hours of standby time. However, 

the  talk  and  standby  times  may  vary  when  used  with  different  mobile  phones,  products  or  devices  that  use  a 

Bluetooth connection, usage settings, usage styles, and environments. 

When the battery power is very low, XBS-08 have a ring reminder, and battery sign will be blank, and blinking. This 

meant that the headset needs to be charged as soon as possible. 

*The maximum operating range depends on the usage frequency and environmental factors 

 

D. Battery information 

Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or 

three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will 

eventually wear out. Recharge your battery only with compatible chargers designated for this device. 

Unplug  the  charger  from  the  electrical  plug  and  the  device  when  not  in  use.  Do  not  leave  a  fully  charged  battery 

connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its 

charge over time. Never use any charger that is damaged. 

Leaving  the  device  in  hot  or  cold  places,  such  as  in  a  closed  car  in  summer  or  winter  conditions,  will  reduce  the 

capacity and lifetime of the battery. Always try to keep the battery between 15

 and 25

 (

59

 and 77

). A device 

with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is 

Reviews: