Xerox 2006NPC - DocuColor Color Laser User Manual Download

Page: 420 / 574

22. Copy Features

Xerox DocuColor 2006

22–20

Using the Output option

Use the following procedure to make a copy using the Output option:
1.

If the DocuColor 2006 is in printer mode, press the

Copy

button to enter

copy mode.

2. Press

the

Clear All

button to restore default settings.

Position the original on the Document Glass or in the Document Feeder.

For more information on position originals on the Document Glass

and using

the Document Feeder, go to the Basic Copying chapter.

4. Press

the

Advanced Features

button. Advanced Features selection

displayed on the Copier Screen.

Use the Arrow Buttons

to highlight the Output option.

6. Press

the

Select

button. Output Destination selection is displayed on the

Copier screen.

Use the Arrow Buttons

to highlight one of the following:

•

Exit Tray to direct output to the printer side output tray.

•

Top

Tray

to direct output to the printer top output tray.

•

Sort/Stack selections if option is enabled. Refer to the section

Determining Output with the optional Sorter/Stacker

8. Press

the

Select

button. Advanced Features selection

is displayed on

the Copier Screen.

9. Press

the

Exit

button. The Main Screen is displayed on the Copier

Screen.

10. Enter your desired number of copies using the Numeric Keypad.
11. Press

the

Start

button.

Summary of Contents for 2006NPC - DocuColor Color Laser































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006NPC - DocuColor Color Laser

Reviews:

Related manuals for 2006NPC - DocuColor Color Laser

Brands by name

Popular brands

Xerox 2006NPC - DocuColor Color Laser, User Manual

Search results

Summary of Contents for 2006NPC - DocuColor Color Laser

Reviews:

Related manuals for 2006NPC - DocuColor Color Laser

Brands by name

Popular brands