1-2
Safety & Environment
Maintenance
Any operator maintenance procedures will be described in the customer
documentation supplied with the product. Do not carry out any maintenance on this
product that is not described in the customer documentation.
• This product is equipped with a 3-wire type plug, provided with a protective earthing
pin. This plug will fit only into an earthed power outlet. This is a safety feature. To
avoid risk of electric shock, contact your electrician to replace the receptacle if you
are unable to insert the plug into the outlet. Never use an earthed adapter plug to
connect the product to a power source receptacle that lacks an earth connection
terminal.
• This product should be operated from the type of power source indicated on the
marking label. If you are not sure of the type of power available, consult your local
power company.
• Do not allow anything to rest on the power cable. Do not locate the product where
persons will step or trip on the cable.
• Use of an extension cable with this product is not recommended or authorized.
Users should check building codes and insurance requirements if a properly earthed
extension cable is to be used. Ensure that the total ampere ratings of the products
plugged into the extension cable do not exceed the extension cable ampere rating.
Also, ensure that the total amperage of all products plugged into the wall outlets
does not exceed the outlet rating.
• Disconnect Device
for this product is the power cable. To remove all electrical power
to the product, disconnect the power cable from the power receptacle.
• Your equipment is equipped with an energy saving device to conserve power when
the machine is not in use. The machine may be left on continuously.
• Unplug
this product from the wall outlet before cleaning. Always use materials
specifically designated for this product. Use of other materials may result in poor
performance and could create a hazardous situation.
•
Do not
use aerosol cleaners. Follow the instructions in this User Guide for proper
cleaning methods.
•
Never
use supplies or cleaning materials for purposes other than those for which
they were intended. Keep all supplies and materials out of reach of children.
•
Do not
use this product near water, wet locations, or outdoors.
•
Do not
place this product on an unstable cart, stand or table. The product may fall,
causing personal injury or serious damage to the product.
• Slots and Openings
in the cabinet and in the back and sides of the product are
provided for ventilation. To ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or covered. The product
should never be located near or over a radiator or heat register. This product should
not be placed in a built-in installation unless proper ventilation is provided.
Summary of Contents for 2121L - FaxCentre B/W Laser
