Maintenance
7-23
Remove wrinkles or creases from the document.
The machine does not receive any faxes
Check that the telephone line is correctly connected and that there is a tone signal on
the telephone line by means of the
key
.
You receive a blank page
Make a photocopy of a document; if it prints correctly then your machine is functioning
normally. Call the sender and have them resend the document.
You cannot send a fax
Check that the telephone line is correctly connected.
Check that there is a dial tone by pressing the
key.
Check the prefix is correctly programmed and used.
Machine packing and transportation
Always use the original packaging when transporting the machine. Failure to do so
could void the warranty.
¾
1 - Disconnect the machine from the telephone network and the AC power socket.
¾
2 - Close the front cover. Unplug the phone line cable and the AC power cable.
Remove the document feed tray and the document output tray. Put them in their
original packaging.
¾
3 - Put the machine in the plastic bag and then in the original packaging, with all the
original packing material.
¾
4 - Close the shipping box with adhesive tape.
Summary of Contents for 2121L - FaxCentre B/W Laser
