DOCUPRINT 96/4635/180 IPS MESSAGES
XEROX DOCUPRINT IPS MESSAGES GUIDE
2-33
08-191
Sheet fed from tray 1 too narrow.
The registration transport sensor dynamic width measurement of a
sheet of paper fed from tray 1 is less than the expected paper width.
Action
Open tray 1, check the paper size and replace the paper with the
correct size. Close the tray and retry the operation.
08-192
Sheet fed from tray 2 too narrow.
The registration transport sensor dynamic width measurement of a
sheet of paper fed from tray 2 is less than the expected paper width.
Action
Open tray 2, check the paper size and replace the paper with the
correct size. Close the tray and retry the operation.
08-193-1
Sheet fed from tray 3 too narrow.
The registration transport sensor dynamic width measurement of a
sheet of paper fed from tray 3 is less than the expected paper width.
Action
Open tray 3, check the paper size and replace the paper with the
correct size. Close the tray and retry the operation.
08-193-2
Sheet fed from tray 4 too narrow.
The registration transport sensor dynamic width measurement of a
sheet of paper fed from tray 4 is less than the expected paper width.
Action
Open tray 4, check the paper size and replace the paper with the
correct size. Close the tray and retry the operation.
08-194
Sheet fed from tray 1 is too wide.
The registration transport sensor dynamic width measurement of a
sheet of paper fed from tray 1 is greater than the expected paper
width.
Action
Open tray 1, check the paper size and replace the paper with the
correct size. Close the tray and retry the operation.
08-195
Sheet fed from tray 2 is too wide.
The registration transport sensor dynamic width measurement of a
sheet of paper fed from tray 2 is greater than the expected paper
width.
Action
Open tray 2, check the paper size and replace the paper with the
correct size. Close the tray and retry the operation.
08-196-1
Sheet fed from tray 3 is too wide.
The registration transport sensor dynamic width measurement of a
sheet of paper fed from tray 3 is greater than the expected paper
width.
Action
Open tray 3, check the paper size and replace the paper with the
correct size. Close the tray and retry the operation.
