DOCUPRINT 4050, 4090, 4850, 4890, AND 92C IPS MESSAGES
XEROX DOCUPRINT IPS MESSAGES GUIDE
3-19
F164
Stacker jam, late departure from bin 2 sensor.
The paper did not leave bin 2 in time, causing a jam.
Action
Follow the instructions that display to locate and clear the jam or clear
the entire paper path. Close the stacker covers and press the
[Continue] button. (Refer to the
Xerox DocuPrint 4850/4890
or
92C
IPS Troubleshooting Guide
for the procedure.)
F166
Bin 1 is full.
Output bin 1 is full.
Action
Remove the jobs contained in output bin 1 and press the [Continue]
button.
F167
Bin 2 is full.
Output bin 2 is full.
Action
Remove the jobs contained in output bin 2 and press the [Continue]
button.
F168
Both stacker bins are full.
The stacker bins are both full.
Action
Remove the jobs contained in the two stacker bins and press the
[Continue] button.
F171
Stitcher jam, late departure at stitcher sensor.
The paper did not leave the stitcher in time, causing a jam.
Action
Clear the stitcher paper path, areas A and B. Discard any output in
the top tray and press the [Continue] button. (Refer to the
Xerox
DocuPrint 4850/4890
or
92C IPS Troubleshooting Guide
for the
procedure.)
F173
Stitcher cover open.
The stitcher top cover is open.
Action
Close the stitcher cover, discard any purged output, and press the
[Continue] button.
F174
Stacker cover open.
The top cover of the stacker module is open.
Action
Close the top cover of the stacker, discard any purged output, and
press the [Continue] button.
