SETTING UP THE LPS
When the booting process is complete, the system controller
displays the following messages:
XEROX 4090
LASER PRINTING SYSTEM
Version V4 Revision X.X
Copyright 1991, 1992, 1993,1994 Xerox Corporation. All rights reserved.
Disk ID = system name JAN 3, 1994 15:06:16
When initialization is complete, the system displays the ready
message:
OS1000 READY FOR COMMANDS
4. Log on to the system.
Logging on to security level 1 is automatic. This security
level is usually appropriate for an operator. However, if you
want to enter the SETTIME command, you must log on to
security level 2.
To log on to level 2, enter the LOGON command:
LOGON 2 [,password]
Your system administrator must provide you with the
password for security level 2. For more information about
logging on, refer to the Xerox 4050/4090/4450/4650 LPS
Command Reference.
After powering on, allow four to seven minutes for the
printer to warm up. When the printer is ready, you hear a
tone, and the system displays the following message on the
printer control console:
READY--JOB START WILL BE DELAYED 20-40 SECONDS FOR PRINT
QUALITY ADJUSTMENT
2-2
XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE
