PRINTING JOBS
Selecting reports within a job
You can only select specific reports within a job for offline jobs.
If you have not yet entered the START command for the job, you
can specify the reports to print and their order in the START
command. Refer to the section, “Starting an offline or online
print job,” earlier in this chapter.
Follow these steps if you entered the START command but the
job has not started printing:
1. Enter SPACE n REPORTS, replacing n with the number of
reports to skip. You can move forward by entering a positive
value for n, or backward by entering a negative value for n.
2. Press <CON> to continue.
Follow these steps if you entered the START command and the
job is already printing:
1. Interrupt the print job by doing one of the following: press
<STOP> on the keyboard, the Stop button on the printer
control console, or enter STOP at the keyboard.
2. Enter SPACE n REPORTS, replacing n with the number of
reports to skip.
You can move forward by entering a positive value for n, or
backward by entering a negative value for n.
3. Press <CON> to continue.
Printing multiple copies of large jobs
When multiple copies of a report are printed in collated mode,
the system processes all pages of the first copy from first to last,
then repeats the process for each additional copy requested.
The mode (collated or noncollated) is specified by the person
who created the job.
Offline jobs
When a report in an offline job is too large to fit on one tape,
you may be prompted to mount and unload each tape once for
each copy. The system displays the following message:
OS2020 Mount next volume 'CONTINUE I' when ready
The person who created the job may have split the report into
smaller parts that fit onto a single tape. This eliminates the need
to mount and unload tapes for each copy; however, the
segments of each report must be assembled by hand when
printing is complete.
Online jobs
If the system cannot store the entire report on the system disk
and multiple copies of the report are requested, the system
displays the following messages:
0S6300 Current report saturates disk. Enter option:
CONTINUE I
-
CONTINUE MULTICOPY MOD
PRINT 1
-
PRINT ONE COPY OF CURRENT REPORT
ENDJOB
-
PRINT ALL COPIES SO FAR, END
ABORT O
-
ABORT CURRENT REPORT
ABORT
-
ABORT CURRENT JOB
4-6
XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE
