S e l e c t i n g a P a p e r S o u r c e
C h a p t e r 2 : H a n d l i n g P a p e r
❖
2-41
You have a MBF installed. You want to print mostly on white
A4 size paper but sometimes on DL size envelopes.
Occasionally, you print on color A4 size paper.
1.
Load the upper and middle trays with white A4 paper
stock.
2.
Load the lower tray with color A4 paper stock.
3.
Load the MBF with DL envelopes.
4.
Set
Source Mapping
for “Upper” to “Upper-Middle.”
5.
Set
Source Mapping
for “Lower” to “Lower.”
6.
Set
Source Mapping
for “Manual” and “Manual
Envelope” to “MBF.”
7.
Set
MBF Paper Size
to “DL.”
8.
In either your software application or the Xerox printer
driver, set paper source to:
— Upper tray for A4 pages (white stock).
— Lower tray for A4 pages (color stock).
— Manual for DL envelopes. (You could have also set
paper source to Manual Envelope for DL envelopes.)
The printer will pull white A4 paper from the upper tray until
it is empty, then from the middle tray. It will pull color A4
pages from the lower tray. It will pull DL envelopes from the
MBF.
Example 6
WUG-CH02 Page 41 Black,Red,Cyan Sunday, January 22, 1995 7:32 PM
