background image

Resolving system problems

Troubleshooting Guide

7-3

Job prints on the wrong 
paper, or is otherwise not 
as expected.

Paper in the tray and tray 
settings do not match.

Check the trays and Enter 

Show Status

.

Change paper in the tray or set the 
correct paper type using 

Set Tray

.

Job has a job ticket and 
specified virtual printer has 
SkipJTPreScan set to 
True. (Does not apply to 
IPDS.)

Enter 

List Virtual Printers

.

Send to another virtual printer with 
SkipJTPreScan set to False.

Job has attributes from 
some other source (DSC, 
embedded from job ticket, 
etc.)

Enter 

Show Document Attributes

.

Resend if necessary. Enter 

Change 

Document Attributes

 to specify desired 

attributes.

Ensure that “Fit to Paper” or an 
equivalent selection is not selected in 
user print driver.

User error in entering print 
options from the client 
workstation.

Enter 

Show Document Attributes

.

Resend if necessary using correct 
options, or enter 

Change Document 

Attributes

 to specify the desired 

attributes.

Job prints correctly on the 
right media, but an error 
message on the trailer 
page indicates a media 
error.

There are PostScript 
setpagedevice operators in 
the job that specify the 
media to use, and the job 
submission method or 
virtual printer specified 
other media.

Enter 

Show Document Attributes

 to 

view the requested media and compare 
with output. Then check the PostScript 
code of the file. You can enter 

Examine 

Document

, but it may be easier to do this 

from a user workstation.

If the job has printed as desired, do 
nothing. If you want the job to print using 
the media set by the setpagedevice 
operators, do not use a job submission 
method that creates a job ticket, or use a 
virtual printer with SkipJTPreScan set to 
True, and no media attributes.

Symptom

Probable cause

Action

Summary of Contents for 4890 Advanced







































































Reviews: