INTRODUCTION TO THE GRAPHICAL USER INTERFACE
1-12
XEROX DOCUPRINT 4850/4890 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Diagnostics menu
Use the Diagnostics menu to print samples and specify trace mode
options. (It is also used by your service representative to access
system diagnostic functions.)
Figure 1-12. Diagnostics pull-down menu
The Diagnostics pull-down menu contains the following items:
•
Sample Prints — Allows you to print sample files (test
patterns), to exercise the print engine, and to perform a manual
print quality adjustment (PQA).
•
Trace Options — Allows you to capture and execute a
diagnostic trace of your system. This function is available to
Administrator and Service privilege mode users only.
•
Service Mode — Accessed by your service representative;
This function is available to Service privilege mode users only.
•
Debug Level — Displays different levels of debug messages to
be stored in log message files. This function is available to
Administrator and Service privilege mode users only.
Note:
Operating at a Debug Level other than 0 could reduce
throughput speed.
•
Null Modem Connection — Accessed by your service
representative; This function is available to Service privilege
mode users only.
•
Log Service Call — Accessed by your service representative;
This function is available to Service privilege mode users only.
•
Update from CDROM — Allows you to update your software
using a CD. This function is available to Administrator and
Service privilege mode users only.
•
Update from Floppy — Allows you to update your software
using a diskette. This function is available to Administrator and
Service privilege mode users only.
•
Install Remote Update — Allows you to update your software
remotely. This function is available to Administrator and Service
privilege mode users only.
