Using Dynamic Job Descriptor Entries (DJDEs)
Using LCDS Print Description Language
5-61
PALETTE DJDE example
PALETTE = ’SIMPLE’
PMODE DJDE
Specifies the text orientation for each page.
Type
Page oriented
Syntax
PMODE = {LANDSCAPE | PORTRAIT}
Options
PMODE DJDE: point to note
If PMODE is changed through a DJDE, the BEGIN DJDE should
be respecified (even if the same horizontal and vertical positions
were specified in the previous BEGIN DJDE).
RFORM DJDE
Specifies a form to be printed with all RTEXT pages. It takes
effect on the next RTEXT page. The options are the same as for
the ROUTE RFORM command.
Type
Page oriented
Syntax
RFORM = {
formid
[, (INKS,
inkref
1
[,
inkref
2
])] | NONE}
Table 5-50. PMODE DJDE options and definitions
Option
Definition
LANDSCAPE
Indicates that print lines will be parallel to the long edge of the
paper (for paper loaded with its short edge facing the feed
direction). Print lines on 11 by 17 inch paper are parallel to the
short edge.
PORTRAIT
Indicates that print lines will be parallel to the short edge of the
paper (for paper loaded with its long edge facing the feed
direction). Print lines on 11 by 17 inch paper are parallel to the
long edge.
Summary of Contents for 6100BD - Phaser Color Laser Printer
