Xerox 6279, Safety Manual

-

The equipment emits an unusual noise or odor.

-

The power cord is damaged or frayed.

-

A wall panel circuit breaker, fuse, or other safety device has been tripped.

-

Liquid is spilled into the copier/printer.

-

The equipment is exposed to water.

-

Any part of the equipment is damaged.

Operational Safety Information

To ensure the continued safe operation of your Xerox equipment, follow these safety
guidelines at all times.

Do These:

• Always connect equipment to a correctly grounded power outlet. If in doubt, have

the outlet checked by a qualified electrician.

•

This equipment must be connected to a protective grounded circuit, and the
equipment is supplied with a plug that has a protective grounding pin. This plug

-

will only fit into a grounded electrical outlet. This is a safety feature. To avoid risk
of electric shock, contact your electrician to replace the electrical outlet if you are
unable to insert the plug into it. Never use a plug that lacks a grounded connection
terminal to connect the product to an electrical outlet.

• Always follow all warnings and instructions that are marked on or supplied with the

equipment.

• Always exercise care when moving or relocating equipment. Please contact your local

Xerox Service Department, or your local support organization to arrange relocation
of the product to a location outside of your building.

• Always locate the equipment in an area that has adequate ventilation, and has room

for servicing. See the Install Guide for minimum dimensions.

• Always use materials and supplies specifically designed for your Xerox equipment.

The use of unsuitable materials may result in poor performance.

• Always unplug this equipment from the electrical outlet before cleaning.

1-3

Xerox

®

 6279

®

 Wide Format Solution

Safety Guide

Safety Notes