15. Select Change Settings.
16. Assign the desired parameters to the paper curl Type (1-10) option.
a) Select the Name field.
b) Use the keyboard to enter a name.
c) Select the appropriate settings for 1 Sided-Face Up, 1 Sided-Face Down, and 2
Sided output.
Use the arrow buttons to select the correct amount of curl.
NOTE
Selecting Auto lets the system automatically adjust the paper curl.
d) Select Sample Printout.
Review the sample for paper curl. If the sample printout still continues too much
curl, further adjust the paper curl parameters and print another sample printout.
17. Continue adjusting the paper curl parameters until satisfied with the printouts. Once
a satisfactory printout is achieved, select Save.
The Adjust Paper Curl screen is displayed.
18. Select Close.
The secondary custom paper screen is displayed.
19. Select Close.
The Custom Paper Settings screen displays.
20. Select Close.
The Paper Tray Settings screen displays.
21. Select Close.
The main Tools tab screen is displayed.
22. Exit administrator mode.
Custom Paper Settings > Alignment Adjustment
1. Load paper in the desired tray.
2. Login as administrator.
3. Access the Tools tab on the UI.
4. Select System Settings > Common Service Settings.
5. Select Paper Tray Settings.
The Paper Tray Settings screen displays.
6. Select Custom Paper Settings.
The Custom Paper Settings screen displays.
7. Select a custom paper item.
(For example, select Custom Paper 1.)
8. Select Change Settings.
A secondary Custom Paper screen opens and displays a variety of options. For example,
the screen displays Custom Paper 1 at the top of it.
9. If required, select Name.
a) Select Change Settings.
b) Enter the desired name for the custom paper.
c) Select Save.
Xerox
®
770 Digital Color Press
2-12
System Administration Guide
System Settings > Common Service Settings
