Secure Watermark Effect
Set Default Secure Watermark, Background Pattern, Background Contrast, and
Custom Secure Watermarks 1,2, and 3.
Selecting the Secure Watermark options
1. Login as administrator.
2. Access the Tools tab on the UI.
3. Select System Settings > Common Service Settings.
4. Select Secure Watermark.
The Secure Watermark screen displays.
5. Select desired feature from the Secure Watermark screen.
6. Select the desired setting for the feature.
7. Select Save.
The Secure Watermark screen displays.
8. If desired, select another feature to set or change and repeat the previous steps.
9. Select Close.
The main Tools tab screen is displayed.
10. Exit administrator mode.
Other Settings
Use this feature to assign a variety of settings for commonly used features; options
include the following:
Offset Stacking (Right Middle Tray)
This feature is available only when the Standard/Booklet Maker Finisher is connected
to the machine. Select the default offset stacking option for the finisher tray:
• None: If this option is selected, the finishing tray will not offset any output.
• Offset per set: If this option is selected, the finishing tray will offset each set of a
copy/print job. This option also offsets each job.
• Offset per job: If this option is selected, all the sets of a job are delivered on one
stack to the output area. When the next job starts, that job is offset from the previous
job in the tray. This option does not offset each set of a job.
2-35
Xerox
®
770 Digital Color Press
System Administration Guide
System Settings > Common Service Settings
