background image

Operation of Up/Down Buttons

Select whether or not to enable continuous scrolling when pressing the scroll buttons.

Display of Consumables Screen

Select whether or not to display the consumables status when a replacement is required;
options include:

• Off: Does not display the consumables status screen.

• When power is switched on: Displays the consumables status screen at startup.

• When Auto Clear is activated: Displays the consumables status screen when

Auto Clear is executed.

Data Encryption

If you want the recorded data on the hard disk encrypted, select On as the default
setting for this feature. By switching on the data encryption, all data written to the
hard disk is automatically encrypted. Encryption prevents unauthorized access to the
stored data.When encryption is on, an encryption key must be set.

NOTE

This is an optional feature that may not be available on your machine; it is part
of the optional Data Security Kit. For more information, contact the Customer
Support Center.

Encryption Key for Confidential Data

This optional feature sets an encryption key to encrypt confidential information such
as the passcode of the system administrator. Encrypting confidential information
prevents a network hacking and an unauthorized access to the information. Enter an
encryption key of 4 to 12 characters using alphanumeric characters.

IMPORTANT

If you change the existing encryption key, you may not restore confidential
information from a backup. The factory default encryption key is x-admin.

NOTE

This is an optional feature that may not be available on your machine; it is part
of the optional Data Security Kit. For more information, contact the Customer
Support Center. Furthermore, a service representative can block changes to the
settings of this feature.

2-37

Xerox

®

 770 Digital Color Press

System Administration Guide

System Settings  > Common Service Settings

Summary of Contents for 770



















































































































Reviews: