Version 10.0
Page 106 of 160
AccXES PJL Interface
USTATUS [3 ENUMERATED]
DEVICE
JOB
PAGE
MEMORY=<decimal number of bytes total RAM>
DISPLAY LINES=2
DISPLAY CHARACTER SIZE=40
MASS STORAGE [3 ENUMERATED]
HARD DISK 1.6GB
CD ROM
FLOPPY DRIVE
SCANNER TYPE={NONE, TYPENAME}
FOLDER TYPE={NONE, TYPENAME}
MODEM={NONE, PRESENT}
<FF>
6.3 FILESYS
The INFO FILESYS command returns the following information for each volume initialized one the
PJL file system:
Total Capacity
Free Space
Location
Volume Label
Volume Read/Write status
The response for systems without a defined file system accessible by PJL or one without a mass storage
device is:
@PJL INFO FILESYS
“?”
<FF>
For those printers with a defined file system accessible by HP-PJL, the response is:
@PJL INFO FILESYS [2 TABLE]
