Version 10.0
Page 58 of 160
AccXES PJL Interface
this value depends on the
value of
RASTERSTAMPSCALEMO
DE. If the mode is
RELATIVE, then this value
is a percentage. The stamp
will be autoscaled to this
percentage of the printable
area of the page. A value of
100% is equivalent to
autoscaling to the paper. If
the mode is ABSOLUTE,
then this number is an
absolute scaling percentage
applied to the stamp.
Range: {10 – 999%}.
Render Mode
RENDERMODE
R/W, Std,
Enum
Sets the intended color
model of the printers
rendering mechanism.
Range: {COLOR,
GRAYSCALE} Default:
product dependent
Under Size Margin
UNDERSIZEMARGIN
R/W,
Integer
When PAPER is set to a
value for auto size detection
(ANY, ANY_ANSI,
ANY_ARCH, ANY_ISO, or
ANY_JIS), then this
parameter determines the
threshold for rounding the
selected paper size up to a
standard paper size. If both
dimensions of the image
(including justification) are
smaller than a standard
papers size by less than the
percentage stored in this
parameter, then this paper
size is chosen. Range:
{0-100%} Default: 2%
Use Marked Area
USEMARKEDAREA
R/W, Bool
When PAPER is set to a
value for auto size detection
(ANY, ANY_ANSI,
ANY_ARCH, ANY_ISO, or
ANY_JIS), then this
parameter determines
whether the size of the
image used to determine
paper size and image
placement is taken from the
actual bounding box of
marks on the page (ON), or
specified by data format
dependant page size
commands if available
(OFF). Range: {ON, OFF}
Default: OFF
