DocuColor 8000/7000 System Administration Guide
1-91
1. Tools Mode
9. Select
Test Print
to ensure that the output is satisfactory.
a. Touch the
2 Sided
button.
NOTE: If you want to check the registration for 1 Sided
prints only, touch the 1 Sided button.
b. Select
10
test prints by touching the
Up
arrow button to
change the number of test prints generated.
c. Touch the
Pattern Generator
button.
d. Retrieve your output test prints from the digital press.
e. Discard the first few prints, as inconsistency tends to be
greater with these images.
10. Evaluate the test prints by holding your 2 Sided output at eye
level near a light source. This will allow you to see the
registration marks for both Side 1 and Side 2 of the output.
a. If you determine that the registration between Side 1 and
Side 2 is significant and needs adjusting, repeat Steps 7-9
until you achieve satisfactory output. Proceed to the Step
11.
b. If the registration between Side 1 and Side 2 is okay, stop
now and proceed to the next step.
Summary of Contents for C8 - DocuPrint Color Inkjet Printer
