DocuColor 8000/7000 System Administration Guide
1-46
1. Tools Mode
Using the Decurler E Table Settings
1. Load the Paper Tray with the paper you wish to use for a job.
Make the correct paper weight selections on the tray for the
paper being used and run a few test prints. If there is too
much curl, continue with step 2.
2. On the
Machine Defaults 2
screen, touch the
Deculer E Table
Settings
button. The Deculer E Table Settings window opens:
KEY POINT:
The digital press retains the last set values for all the
E Table Settings options. Therefore, before you make or change
any E Table selections, copy and use the E Table Settings Chart
located at the back of this book to record the default, manufacturer
settings for each E Type (E1-E6).
NOTE: The manufacturer defaults for the above screen are Single
Paper Weight, Type E1, and Simplex Straight.
3. Select the
Paper Type
: Single Paper Weight or Mixed Paper
Weight.
Summary of Contents for C8 - DocuPrint Color Inkjet Printer
