October 2012
xviii
ColorQube 8570/8870 Service Manual
Printer Specifications
Revised, 3rd Revision - Xerox Internal Use Only
Introduction
Electrical Specifications
Environmental Specifications
NOTE: Check that the printer is on a stable, non-vibrating surface. Advise the customer to use
care not to shake the printer excessively when loading media or closing the Front Door. During
operation, the ink is in liquid form and can spill from the Printhead reservoir resulting in output
defects.
Print Speed
First Print Output Time
First Print Output Time (FPOT) is defined as the time from when the engine receives a Start
signal in Ready state, until a single page is printed and delivered to the output tray.
From Ready State
From Non-Ready State
First Print Out Time includes the time required to print any maintenance pages (such as the
mud page) and a single customer page on A size media from Tray 2.
Table 3 Electrical Specifications
Characteristic
Specifications
Primary Line Voltages
•
90 - 140 VAC
•
180 - 264 VAC
Primary Line Voltages Frequency Range
47 - 63 Hz
Power Consumption at Rated Voltage Input
•
Warm-Up:
–
Peak: 1250 W
–
Typical: 930 W
•
Printing: 250 W
•
Idle: 104 W
•
Power Saver: 45 W
–
38 W (110)
–
41 W (220)
In-rush Current
•
Less than 12A (110)
•
Less than 6A (220)
Leakage Current
Less than 3.5 mA
Table 4 Environmental Specifications
Characteristic
Specifications
Operating
Storage
Temperature
10
º
to 32
º
C (50º to 90º F)
-30
º
to 60
º
C (-22º to 140º F)
Humidity
10% to 80% RH Non-Condensing 10% to 95% RH, non-condensing
Altitude
0 to 2,438 meters (8,000 ft.)
0 to 15,000 meters (49,212 ft.)
Acoustic Noise
Operation
Standby or Ready
Sound Power Level
(Bels)
7.0 B(A)
4.4 B(A)
Sound Pressure (Deci-
bels)
57.0 dB(A)
31.0 dB(A)
Table 5 Print Speed Specifications
Resolution/ Tray
Simplex, A4 Paper
Auto Duplex, A4 Paper
Tray 1
Fast Color (225x400)
13 ppm
13 ppm
Standard (300x450)
11 ppm
11 ppm
Enhanced (525x450)
10 ppm
9 ppm
Photo (525x2400)
6 ppm
6 ppm
PCL 600x400 Mode
10 ppm
9 ppm
PCL 600x600 Mode
6 ppm
6 ppm
Tray 2
Fast Color (225x400)
40 ppm
30 ppm
Standard (300x450)
30 ppm
25 ppm
Enhanced (525x450)
19 ppm
18 ppm
Photo (525x2400)
6 ppm
4 ppm
PCL 600x400 Mode
20 ppm
18 ppm
PCL 600x600 Mode
12 ppm
10 ppm
Table 6 Ready State
Resolution
FPOT
Fast Color (225x400)
4 seconds or less
Standard (300x450)
7 seconds or less
Enhanced (525x450)
9 seconds or less
Photo (525x2400)
15 seconds or less
Table 7 Non-Ready State
Starting State
FPOT
Off (cold)
12 minutes
Power Saver
2.5 minutes
Low Power (Standby)
30 seconds
Quiet Warm-Up
10 seconds
Summary of Contents for COLORQUBE 8570
Page 1: ...ColorQube 8570 8870 Printer ColorQube 8570 8870 Service Manual Xerox Internal Use Only...
Page 2: ......
Page 423: ......
