October 2012
4-57
ColorQube 8570/8870 Service Manual
REP 3.4, REP 3.5
Repairs and Adjustments
Xerox Internal Use Only - Revised, 3rd Revision
REP 3.4 Outer Duplex Guide
Parts List on
PL 3.1 Item 4
Removal
1.
Open the Front Door.
2.
Remove the Control Panel Cover (
REP 1.5
).
3.
Remove the Left Side Cover (
REP 1.10
).
4.
Remove the Right Side Cover (
REP 1.11
).
5.
Lift and let the Control Panel hang on the right side of the printer.
6.
Disconnect the wiring harness connector
P/J101
from the I/O Board.
7.
Remove the 4 screws (plastic, T-20) that secure the Outer Duplex Guide to the chassis.
8.
Lift and remove the Outer Duplex Guide.
Figure 1 Removing the Outer Duplex Guide
REP 3.5 Upper Duplex Guide and Solenoid
Parts List on
PL 3.1 Item 5
Removal
1.
Open the Front Door.
2.
Remove the Control Panel Cover (
REP 1.5
).
3.
Remove the Left Side Cover (
REP 1.10
).
4.
Remove the Right Side Cover (
REP 1.11
).
5.
Lift and let the Control Panel hang on the right side of the printer.
6.
Remove the Outer Duplex Guide (
REP 3.4
).
7.
Disconnect the Solenoid wiring harness connector
P/J121
from the Right Side Harness.
Figure 1 Disconnecting Wiring Harness Connector from Right Side Harness
Summary of Contents for COLORQUBE 8570
Page 1: ...ColorQube 8570 8870 Printer ColorQube 8570 8870 Service Manual Xerox Internal Use Only...
Page 2: ......
Page 423: ......
