October 2012
4-61
ColorQube 8570/8870 Service Manual
REP 3.10
Repairs and Adjustments
Xerox Internal Use Only - Revised, 3rd Revision
REP 3.10 Pick Assembly and Retard Roller
Parts List on
PL 3.1 Item 10
Removal
1.
Remove Tray 2/3/4/5.
Figure 1 Removing Tray 2/3/4/5
2.
Release the Pick Roller catch and pull downward to remove the Roller.
NOTE: The Pick Roller catch is located on the ceiling of the tray cavity about 1/4 of the
way across the unit from the right side, and about 5 in. (12.5 cm) back. When you forward
on the catch, the Roller swings down.
Figure 2 Removing the Pick Roller
3.
Lift the Retard Roller vertically, then pull the Roller from the shaft in the tray.
Figure 3 Removing the Retard Roller
Summary of Contents for COLORQUBE 8570
Page 1: ...ColorQube 8570 8870 Printer ColorQube 8570 8870 Service Manual Xerox Internal Use Only...
Page 2: ......
Page 423: ......
